Dolphin Bottle Green Audio on Nissan Primera

Sent In By Customer - Vikram Mishra

Bolton

Photo 1 - marking postion for the sensors with blu-tac

Photo 2 - Drilling holes in the bumper, before doing this I made sure I planned how to complete the wiring through the bumper, luckily there was a small hole in the boot



Photo 3 - Fitting the sensors, note the wires at the bottom that need tidying up



Photo 4 - Stripping the reversing sensor wire



Photo 5 - Soldering the parking sensor wire to the reversing light wire, I needed to extend this wire as the reverse light is located on the boot area that opens up in the air and wire this all through the boot trim

Photo 6 - Mounting the sensor box in the boot and I tidied all the wiring up





The sensors are great, work really well.  I mounted the audio buzzer in a panel near the rear boot, as was too quiet to mount in the boot, makes parking so easy now.

Dolphin Audio Fitted to Peugeot 508

Peugeot 508 fitted with Matt Black sensors sprayed with exact colour match paint.

 

Nissan Primera With Dolphin Parking Sensors

Nissan Primera 2005 with Grey sensors, Storm Grey would have been a better match for this colour.

Dolphin Fitted to Nissan Qashqai

Nissan Qashqai fitted by installer Danny Boyes.

Peugeot 307SW With Dolphin Parking Sensors

Peugeot 307SW with reversing sensors kitted by Colin of SmartTech Kent

 

Dolphin Parking Sensors For Peugeot 207

This Peugeot 207 SW has the DMS micro parking sensors in matt black fitted in the rear bumper. The customer went for the DMS450 with the dash mounted display but decided to have it fitted on top of the rearview mirror. Normally there would be a piece of cable showing going to the roof lining but some tubing has been put around the wire in this case to make it look more professional.

DPS400F Parking Sensors Kit Fitted to a Nissan Juke 2013

This is an image of our Dolphin automotive DPS400F parking sensors kit fitted to a Nissan Juke 2013. The set was Navy blue and designed to go on the front of a vehicle, supplied with extra long sensor leads to enable easy fitting.

The installation was carried out by Danny Boyes for a Garage in Denbighshire that we regularly supply.