Showing posts with label toyota. Show all posts
Showing posts with label toyota. Show all posts
Sunday, 24 May 2015
Thursday, 20 November 2014
Installation of Dolphin Automotive Parking Sensors on Toyota Aygo
Installation of Dolphin Automotive Parking Sensors on the new Toyota Aygo with multi coloured bumpers. It was suggested to the customer we could offer two red sensors for the outer (It would have cost the same price), but he was happy with the way the white ones looked. The installation was carried out by Daniel Boyes at Pen-Y-Bryn-Autos
Wednesday, 1 October 2014
Dolphin Red Fitted to Toyota Avensis Estate 2003
John Corcoran
I checked before ordering about the bumper and was confident I didn't need to remove it. There is a brace bar behind it and you need to be careful when drilling for sensors A & D as the drill will hit it when through (more so as not to snap the drill). The top of the rear bumper is just over 500mm but the sensors fitted easily at this height though they need to be eased home (the cutter supplied was perfect). It's a bit fiddly but the wires can be cabled tied to the brace bar.
I drilled a 10mm hole in the spare wheel housing (some trays have to be removed for this but the spare wheel can stay in , put in a grommet (bound the wires here with insulation tape) and cabled tied the sensor wires to the loom leading to the nearside rear lamp. There is a locker on the nearside which has an access panel made to measure for the ECU. Removing the floor tray (2*self tappers) allows access under the side trim panel.
It is easier to remove the rear lamp (3*10mm nuts) to join the wires. They are not that thick a gauge wire and I opted to solder but scotch locks should do the job. Removing the lamp also makes it easier to feed the wires up behind the trim panel.
Siting the bleeper was my only problem. It will fit in the locker but I carry several crates and have the touneau cover over them; this does muffle the sound so I opted to run the lead up the trim and put the sensor on a rear window ledge where it's out of the way (for me) but probably not the best place; really depends on the installers preference.
Proof of the pudding was backing up and I'm relieved to say it worked first time (and every time since). the photo shows how close before the continuous tone (In reality this equates to a closer distance than the cone I was using).

All in all worth the money.
Tuesday, 23 September 2014
Dolphin Audio Fitted to Toyota Avensis
Toyota Avensis with a DPS400M kit fitted, this comprises of 4 rear sensors (in silver for this customer), a rear view night vision camera and not shown in the photo is the mirror monitor.

Labels:
avensis,
camera,
DPS400M,
mirror,
monitor.,
night vision,
parking sensors,
rear,
rear view,
Silver,
toyota
Sunday, 21 September 2014
Dolphin Silver Fitted to Toyota Auris
Mr Varley
Lancashire
Lancashire
Dolphin Silver Fitted to Toyota Auris, Fitted nicely out of sight
Wednesday, 17 September 2014
Dolphin Parking Sensors Toyota Previa
Example from installer Colin in Kent of a Dolphin DPS455, rear roof mounted display, installed on a Toyota Previa with sea blue colour sensors.

Sunday, 14 September 2014
Dolphin Parking Sensors Toyota Previa
This Toyota Previa has a DPS450F kit fitted which is a front sensor kit with dash mounted display in sea blue. The same car is also shown on a separate page with a rear kit fitted as the customer purchased the DPPK4 kit for complete front and rear protection with the kits independently operated.

Labels:
blue,
dash,
display,
DPPK4,
DPS450F,
fitted,
front sensor,
kit,
mounted,
parking sensors,
Previa,
toyota
Friday, 12 September 2014
Parking Sensors Fitted to Toyota Hilux Invincible
Toyota Hilux Invincible with silver sensors in the chrome rear bumper and silver sensors in the front bodywork. Please note sensors cannot be fitted in enclosed metal spaces such as bull bars but this sort of chrome bumper is OK. Customer opted for a DPPK4 kit which has 4 rear sensors with a rear roof mounted display and separately 4 front sensors with a front dash mounted display. Professional installation carried out by Daniel Boyes, one of our approved partner installers.


Labels:
bull bars,
chrome bumper,
display,
DPPK4,
fitted,
Hilux,
Installation,
installers,
Invincible,
metal,
Professional,
sensors,
Silver,
toyota
Tuesday, 19 August 2014
Friday, 15 August 2014
Toyota GT 86 fitted in Nottinghamshire
Red Dolphin parking sensor kit fitted to Toyota GT 86 fitted in Nottinghamshire by an associate installer


Subscribe to:
Posts (Atom)















