This 2005 Landrover Freelander went in to Watton Towing for replacement rear parking sensors and they were kind enough to send us these images.
The factory fitted parking sensors had developed a fault, they were able to remove them and replace with a set of Dolphin Automotive Parking Sensors. Matt black parking sensors mounted in the original mounts saved their customer ££££s on using genuine parts.
Showing posts with label dolphin. Show all posts
Showing posts with label dolphin. Show all posts
Saturday, 10 February 2018
Friday, 27 May 2016
Detailed Dolphin Parking Sensor Installation
Lee Knowles
Cheshire
Cheshire
Dolphin
Audio in silver fitted to a Honda Civic. Masking tape is used to
accurately identify the drilling location and it helps hold the drill
bit in place when drilling and protect the paintwork. Ideally you want
to mount them 50cm off the ground, you can get away with less but may
need to use the wedges included in the kit to angle the sensors up
slightly if you start mounting at 40cm or less.
The bumper has been drilled in situ but them removed to feed the cabling through to the boot where you can see a hole has been drilled and gromit
fitted to pass the cabling through, you can alternatively use some
silicone sealant. Power lead has been soldered onto the reverse light
feed but a connector block is a more common solution.
Labels:
audio,
best,
bumper,
cheap,
connector block. reverse,
dolphin,
drill bit,
drilling,
fitted,
Honda Civic,
how to install,
Masking tape,
paintwork,
park,
parking sensors,
reverse light,
reversing,
Silver,
wedges
Wednesday, 15 July 2015
Wednesday, 17 June 2015
Tuesday, 21 April 2015
Parking Sensors Fitted to Silver Mercedes C200
This Mercedes C200 has been fitted with Dolphin Micro Sensors, specifically a DMS400 kit, which has smaller sensors needing just an 18mm hole for a more discreet and original look. These have been supplied in our standard silver and fitted in Camberley in Surrey as part of our fixed price fitting option.
Sunday, 12 April 2015
Chrysler Sebring With Dolphin Parking Sensors
Chrysler Sebring
2008 fitting with Dolphin Micro Parking Sensors in gloss black in
Birmingham by Dennis as part of our mobile installation service.

Labels:
2008,
Birmingham,
black,
Chrysler,
dolphin,
fitting,
Installation,
micro,
mobile,
parking,
parking sensors,
reverse,
reversing,
Sebring,
sensors,
service
Wednesday, 8 April 2015
Hyundai i20 With Dolphin Parking Sensors
Hyundia i20 with a DMS400 micro sensors in Silver fitted using our mobile installation service which is nationwide. This fitting was carried out using Colin in Kent.
Saturday, 4 April 2015
Dolphin Grey Fitted to Ford Focus Zetec
Submitted by customer Richard Heyes
.....I
then bought and fitted your Dolphin sensors which are 10x better in
appearance than the last set I had fitted. I had to spray the sensors as
the match wasn't quite right and by spraying them from an increasd distance managed to get a matt finish to match the trim better.

Labels:
appearance,
dolphin,
fitted,
Focus,
Ford,
Ford Focus,
parking sensors,
reverse,
reversing,
sensors,
spray,
trim
Wednesday, 1 April 2015
Dolphin Black Fitted to Citroen C1 Vibe
From Tim Cave
Northamptonshire
Northamptonshire
The fitting of the sensor kit was carried out to an exceptional standard by a Mr. Paul Simms of Platinum ICE as recommended within the documentation provided by yourselves.





Labels:
black,
c1,
citroen,
Citroen C1 Vibe,
dolphin,
fit,
fitted,
how to,
install,
Installation,
parking sensors,
reverse,
reversing,
Vibe
Subscribe to:
Posts (Atom)































