Vauxhall Corsa with "Aqua" rear parking sensors

2005 Vauxhall Corsa with a set of rear 'Aqua' Dolphin Parking Sensors (DPS400) fitted at Watton Towing.

Watton Towing Installation of Daytime Running Lights on to Peugeot 307

Watton Towing fitted DRL550AUTO Daytime Running Lights to a 2005 Peugeot 307 on 16th January 2017.

Image Source Watton Towing Facebook Page

Citroen C5 With Dolphin Parking Sensors

Citroen C5 with our Micro parking sensors fitted in the factory fit holes on the lower trim.

Parking Sensors Fitted to Fiat Motorhome

This is a Fiat Motorhome motor home installation using a preferred water proof box at the back underneath the van to hold the Brain. The parking sensors were fitted through our mobile installer network.

Detailed Dolphin Parking Sensor Installation

Lee Knowles
Cheshire

Dolphin Audio in silver fitted to a Honda Civic. Masking tape is used to accurately identify the drilling location and it helps hold the drill bit in place when drilling and protect the paintwork. Ideally you want to mount them 50cm off the ground, you can get away with less but may need to use the wedges included in the kit to angle the sensors up slightly if you start mounting at 40cm or less.

The bumper has been drilled in situ but them removed to feed the cabling through to the boot where you can see a hole has been drilled and gromit fitted to pass the cabling through, you can alternatively use some silicone sealant. Power lead has been soldered onto the reverse light feed but a connector block is a more common solution. 

Reversing Camera Installation on to Peugeot Boxer

This is a Peugeot Boxer that has been adapted in to a motor home.  Obviously to accomplish this transformation it has undergone the addition of lots of features.  As you can see our installer has also fitted a specialist OEM style reversing camera to make reversing simple for the owner.  You really wouldn't know that that wasn't part of the original Peugeot Boxer van!

Dolphin Audio Fitted to Fiat 500

Grey sensors installed on the rear bumper of a Fiat 500 by Graham at G-Tech