Detailed Dolphin Parking Sensor Installation

Lee Knowles
Cheshire

Dolphin Audio in silver fitted to a Honda Civic. Masking tape is used to accurately identify the drilling location and it helps hold the drill bit in place when drilling and protect the paintwork. Ideally you want to mount them 50cm off the ground, you can get away with less but may need to use the wedges included in the kit to angle the sensors up slightly if you start mounting at 40cm or less.

The bumper has been drilled in situ but them removed to feed the cabling through to the boot where you can see a hole has been drilled and gromit fitted to pass the cabling through, you can alternatively use some silicone sealant. Power lead has been soldered onto the reverse light feed but a connector block is a more common solution. 

Parking Sensors Fitted to Ford Focus Cabriolet

Photo of a DPS450 (4 rear sensors and dash mounted audio/display unit) fitted to a Ford Focus Coupe Cabriolet by Colin of Smart-Tech Kent. Sensors supplied in our standard Red colour giving a good match.

Renault Captur dCI 63 reg fitted with matt black parking sensors

Renault Captur dCI 63 reg fitted with matt black parking sensors in the rear bumper.  The installation was carried out by one of our network installers.

 

 

Dolphin Audio Fitted to BMW Series 1

Our standard 4 rear sensors with audio alerts (DPS400) shown fitted to a BMW Series 1, 118d, 59 plate. Supplied in our standard Red offering a good colour match.

Honda Jazz C-Max Ghia Parking Sensors

Honda Jazz with a DPS450 audio and display kit in silver fitted. Customer has opted to have the display mounted in the corner next to the front A pillar.

 

Dolphin DPS400 Fitted to Audi A4 09 Reg

Sea Blue DPS400 Audio Parking Sensors Kit fitted to 09 registration plate Audi A4. Fitting was carried our by Andrew Rossall of Blackpool Communications.

Dolphin DPS400 Fitted to Ford Fiesta

Matt Black DPS400 Audio Parking Sensors Kit spray painted and fitted to Ford Fiesta. Fitting was carried our by Andrew Rossall of Blackpool Communications.

Dolphin Audio Black Fitted to Seat Leon

From Customer - Craig Radford
Hants

"Here are the pictures of me installing the rear parking sensors on my
2006 Seat Leon. The rear parking sensor are a great product and were very
easy to install. The whole installation process only took just over two
hours and they look great."

Close up of hole drilled in bumper

Close up of sensor placed in drilled hole



Finished job with all 4 sensors installed 



Side view to show how flush sensors sit 

Dolphin Audio Fitted to Vauxhall Vectra 1.9

Audio Kit Fitted to Vauxhall Vectra 58 Registration plate by our fitter Dennis