Dolphin Automotive DC318 reversing camera fitted just above the number plate to a 08 reg VW motorhome.
Showing posts with label motorhome. Show all posts
Showing posts with label motorhome. Show all posts
Thursday, 18 January 2018
Wednesday, 17 January 2018
Friday, 30 September 2016
Parking Sensors Fitted to Fiat Motorhome
This is a Fiat Motorhome motor home installation using a preferred water
proof box at the back underneath the van to hold the Brain. The parking sensors were fitted through our mobile installer network.
Tuesday, 15 September 2015
Edwards Motorhome Fitted With Dolphin Parking sensors
This Edwards motorhome had one of our bronze parking sensor kits fitted by one of our installers. It was a stock colour so there was no need for custom spraying and it was a perfect match.
Wednesday, 13 May 2015
Parking Sensors Installed on Motorhome
This install was carried out by Dennis in Southampton. The kit was a Dolphin Automotive Motor home kit in white.
The front and rear kits were both audio only kits. The 7.5mtr motor home rear kit was all installed into a water proof box under the van at the rear. This protects the cables from weathering as most will run all 4 cables to the front under the Chassis! Not a good idea......
Customer went for simple on/off switch for front rather than the Automatic CanM8 so that he could be in complete control of when the sensors were on off and on.
The 2 sensors either side of number plate had to be placed a little wider than Dennis would have liked as shown on this motor as the Front Crash bar is situated immediately behind the panel.
The front and rear kits were both audio only kits. The 7.5mtr motor home rear kit was all installed into a water proof box under the van at the rear. This protects the cables from weathering as most will run all 4 cables to the front under the Chassis! Not a good idea......
Customer went for simple on/off switch for front rather than the Automatic CanM8 so that he could be in complete control of when the sensors were on off and on.
The 2 sensors either side of number plate had to be placed a little wider than Dennis would have liked as shown on this motor as the Front Crash bar is situated immediately behind the panel.
Sunday, 26 April 2015
Dolphin DMS600 Fitted to Excel Motorhome
This Excel motorhome
has a DMS600 six reversing sensor kit fitted to cover this wide
vehicle. At time of writing the Micro sensors are only available in
silver, gloss or matt black so the customer in this instance was happy with silver although the matt black sensors could have been sprayed if wanted.

Subscribe to:
Posts (Atom)




















